VSG-1200 V2 User’s Guide
59
Chapter 5 System
User Session
Limit
You can set the VSG to limit the number of sessions each user can use at a time.
Select
Unlimited
to allow each user to use any number of sessions at a time.
Select the second option and enter the number of sessions (between 1 and 1024)
each user is allowed to use at a time.
Layer 2 Isolation
Security
If you activate NAT, select
Enable
in this field to prevent communication between
subscribers. This is the default selection.
Select
Disable
to deactivate layer 2 security and allow communication between
subscribers.
Console Type
Use this field to set the function of the console
port on the front panel of the VSG.
Select
Console Setting
when you connect the console port directly to a computer
for local management. This is the default setting.
Select
Statement Printer
and select the printer model when you connect the
console port a statement print.
Console Port
The fields in this section of the screen are applicable when you select Select the
fields below to configure the Console port.
Note:
If you change the console port settings, make sure you also
make the same change to the terminal emulator software.
Bits per
second
This field only applies when you select
Console Setting
in the
Console Type
field.
Select a console port speed from the drop-down list box. Choices are
1200
,
2400
,
4800
,
9600
(default),
14400
,
19200, 38400
,
57600
and
115200
.
Data bits
Select a data bit from the drop-down list box.
Parity
Select the parity from the drop-down list box.
Stop bits
Select the stop bit from the drop-down list box.
Administrator
Authorized Access
IP Address
Select
Any
to use any computer to access the web configurator on the VSG.
Select
Specify
and then enter the IP address(es) or a range of IP addresses of the
computer(s) that is allowed to log in to configure the VSG.
Multicast
Passthrough
Select
Enable
to allow multicast traffic to pass through the VSG. This may affect
your network performance.
Select
Disable
to prevent any multicast traffic from passing through the VSG. This
is the default setting.
Allow remote user
to ping the device
Select
Enable
to respond to Ping requests from the LAN or WAN interface.
Select
Disable
to not respond to Ping requests from the LAN or WAN interface.
SSL Certificate
Certificate Secure Socket Layer (SSL) security allows you to create a secure
connection between the VSG and the client computer(s).
Select
Default
to use the default system-generated SSL certificate.
Select
Custom Certificate
to use a certificate obtained from a certificate authority.
Refer to
for more information.
Apply
Click
Apply
to save the changes.
Table 4
System Setting: System (continued)
LABEL
DESCRIPTION
Summary of Contents for VSG-1200 V2
