ZyXEL Communications VMG5313-B10A User Manual Download Page 28

Page: 28 / 398

Chapter 2 The Web Configurator

VMG5313-B10A/-B30A Series User’s Guide

Routing

Static Route

Use this screen to view and set up static routes on the VMG.

DNS Route

Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).

Policy
Forwarding

Use this screen to configure policy routing on the VMG.

RIP

Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.

QoS

General

Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.

Queue Setup

Use this screen to configure QoS queues.

Class Setup

Use this screen to define a classifier.

Policer Setup

Use these screens to configure QoS policers.

NAT

Port Forwarding

Use this screen to make your local

servers visible to the outside

world.

Applications

Use this screen to configure servers behind the VMG.

Port Triggering

Use this screen to change your VMG’s port triggering settings.

DMZ

Use this screen to configure a default server which receives packets
from ports that are not specified in the

Port Forwarding

screen.

ALG

Use this screen to enable or disable SIP ALG.

Address Mapping Use this screen to change your Device’s address mapping settings.

Sessions

Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the VMG.

DDNS

DNS Entry

Use this screen to view and configure DNS routes.

Dynamic DNS

Use this screen to allow a static hostname alias for a dynamic IP
address.

Vlan Group

Use this screen to group and tag VLAN IDs to outgoing traffic from
the specified interface.

Interface

Grouping

Interface
Grouping

Use this screen to map a port to a PVC or bridge group.

USB Service

File Sharing

Use this screen to enable file sharing via the VMG.

Media Server

Use this screen to use the VMG as a media server.

Print Server

Use this screen to enable the print server on the VMG and get the
model name of the associated printer.

Power

Management

Power
Management

This screen is only available for administrators. Use this screen to
manually turn on/off specific interface(s) and/or all LEDs
immediately.

Auto Switch Off

This screen is only available for administrators. Use this screen to
configure schedules to have the VMG automatically turn on/off
specific interface(s) and/or all LEDs.

Security Settings

Table 3

Navigation Panel Summary (continued)

LINK

TAB

FUNCTION

Summary of Contents for VMG5313-B10A















































































































































































































































































































































































































Search results

Summary of Contents for VMG5313-B10A

Reviews:

Related manuals for VMG5313-B10A

Brands by name

Popular brands

ZyXEL Communications VMG5313-B10A, User Manual

Search results

Summary of Contents for VMG5313-B10A

Reviews:

Related manuals for VMG5313-B10A

Brands by name

Popular brands