manualshive.com logo in svg

ZyXEL Communications VMG5313-B10A, User Manual

Share
Download
ZyXEL Communications VMG5313-B10A User Manual Download Page 22

Chapter 1 Introducing the VMG

VMG5313-B10A/-B30A Series User’s Guide

22

1.8  Wireless Access

The VMG is a wireless Access Point (AP) for wireless clients, such as notebook computers or PDAs 
and iPads. It allows them to connect to the Internet without having to rely on inconvenient Ethernet 
cables.

You can configure your wireless network in either the built-in Web Configurator, or using the WPS 
button.

Figure 3   

Wireless Access Example

1.8.1  Using the Wi-Fi and WPS Buttons

If the wireless network is turned off, press the 

Wi-Fi

 button for one second. Once the 

WiFi

 LED 

turns green, the wireless network is active.

You can also use the

 WPS

 button to quickly set up a secure wireless connection between the VMG 

and a WPS-compatible client by adding one device at a time.

To activate WPS:

1

Make sure the 

PWR/SYS 

LED is on and not blinking.

2

Press the 

WPS 

button for five seconds and release it.

3

Press the WPS button on another WPS-enabled device within range of the VMG. The 

WiFi 

LED 

flashes orange while the VMG sets up a WPS connection with the other wireless device. 

4

Once the connection is successfully made, the 

WiFi 

LED shines green.

To turn off the wireless network, press the 

Wi-Fi

 button for one to five seconds. The 

WiFi 

LED 

turns off when the wireless network is off. 

Summary of Contents for VMG5313-B10A















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands