ZyXEL Communications VES-1616F-44, User Manual

Page: 227 / 296

VES-1616F/1624F-44 User’s Guide
226 Chapter 32 Introducing the Commands
enable traps
interface [linkup|
linkdown|
autonegotiation]
Enables sending of the
interface category’s SNMP
traps to the SNMP station.
13
enable traps help
Displays command
information.
13
enable traps ip
[ping|traceroute]
Enables sending of the IP
category’s SNMP traps to the
SNMP station.
13
enable traps switch
[stp|
mactable|rmon]
Enables sending of the switch
category’s SNMP traps to the
SNMP station.
13
enable traps system
[coldstart|
warmstart| reset
|timesync]
Enables sending of the system
category’s SNMP traps to the
SNMP station.
13
spanning-tree
Enables STP on the switch. 13
<port-list>
Enables STP on a specified
port.
13
path-cost <1-65535>
Sets the STP path cost for a
specified port.
13
priority <0-255>
Sets the priority for a specified
port.
13
hello-time <1-10>
maximum-age <6-40>
forward-delay <4-30>
Sets Hello Time, Maximum Age
and Forward Delay.
13
help
Displays command help
information.
13
priority <0-61440>
Sets the bridge priority of the
switch.
13
spq
Sets the switch to use Strictly
Priority Queuing (SPQ).
13
ssh known-hosts <host-ip>
<1024|ssh-rsa|ssh-dsa>
<key>
Adds a remote host to which
the switch can access using
SSH service.
13
storm-control
Enables broadcast storm
control on the switch.
13
syslog
Enables syslog logging. 13
server <ip-adderss> inactive
Disables syslog logging to the
specified syslog server.
13
level [0 ~ 7]
Sets the IP address of the
syslog server and the severity
level.
13
type <type>
Sets the log type. 13
facility [local 1
..7]
Sets the log type and the file
location on the syslog server.
13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION P