ZyXEL Communications VES-1616F-44, User Manual

Page: 76 / 296

VES-1616F/1624F-44 User’s Guide
Chapter 6 Basic Setting 75
6.10 VDSL Profiles
A profile is a table that contains a list of pre-configured VDSL line settings or VDSL alarm
threshold settings. Each VDSL port has one (and only one) line and alarm profile assigned to it
at any given time.
Profiles allow you to configure VDSL ports efficiently. You can configure all of the VDSL
ports with the same profile, thus removing the need to configure the VDSL ports one-by-one.
You can also change an individual VDSL port by assigning it a different profile.
For example, you could set up different profiles for different kinds of accounts (for example,
economy, standard and premium). Assign the appropriate profile to a VDSL port and it takes
care of a large part of the port’s configuration.
6.10.1 VDSL Profile Setup
The line profile defines VDSL parameters such as the payload rates, the upstream/downstream
signal noise margins and impulse noise protection. You can configure multiple profiles,
including profiles for troubleshooting.
To configure or view VDSL profiles, click Basic Setting and VDSL Profile Setup to display
the screen as shown next.
Note: You can configure up to 20 VDSL profiles.
Latency Select a latency mode. Refer to Section 6.8.5 on page 73 for more information.
PSD Mask Select a PSD mask from the drop-down list box.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.
Table 15 VDSL Common Setup (continued)
LABEL DESCRIPTION