ZyXEL Communications VES-1616F-44, User Manual

Page: 264 / 296

VES-1616F/1624F-44 User’s Guide
Chapter 34 IEEE 802.1Q Tagged VLAN Commands 263
The following example sets ports 1 to 5 to accept only tagged frames.
34.3.3 Enable or Disable Port GVRP
Use the
gvrp
command to enable GVRP on the port(s). Use the
no gvrp
command to disable
GVRP.
The following example turns off GVRP for ports 1 to 5.
34.3.4 Modify Static VLAN
Use the following commands in the
config-vlan
mode to configure the static VLAN table.
Syntax:
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
where
• Enter
fixed
to register the
<port-list>
to the static VLAN table with
<vlan-id>
.
• Enter
normal
to confirm registration of the
<port-list>
to the static VLAN table with
<vlan-id>
.
• Enter
forbidden
to block a
<port-list>
from joining the static VLAN table with
<vlan-id>
.
• Enter
no fixed
or
no forbidden
to change
<port-list>
to normal status.
• Enter
untagged
to send outgoing frames without a tag.
• Enter
no untagged
to tag outgoing frames.
sysname(config)# interface port-channel 1-5
sysname(config-interface)# frame-type tagged
sysname(config)# interface port-channel 1-5
sysname(config-interface)# no gvrp
<vlan-id> =
The VLAN ID [1 – 4094].
<name-str> =
A name to identify the SVLAN entry.
<port-list> =
This is the switch port list.