ZyXEL Communications VANTAGE RADIUS 50, User Manual

Page: 189 / 214

Vantage RADIUS User’s Guide
Command Interpreter I-1
Appendix I
Command Interpreter
The following describes how to use the command interpreter.
)
Use of undocumented commands or misconfiguration can
damage the unit and possibly render it unusable.
Command Syntax
¾ The interface outputs are in
courier new
font.
¾ Command keywords are emboldened and you should enter them exactly as shown, do
not abbreviate.
¾ The required fields in a command are enclosed in angle brackets
<>
.
¾ The optional fields in a command are enclosed in square brackets
[]
.
¾ The
|
symbol means “or”.
¾ For example,
netconf <type> <on|off>
means that you must specify the type of netbios filter and whether to turn it on or
off.
Command Usage
A list of valid commands can be found by typing
help
or
?
at the command prompt. Always type the full
command. Type exit to close the session when you are finished.
Command List
The following lists all the available commands on your Vantage RADIUS.
h or help
Type h or help to display the following list of available commands.
help [netconf|exit]
help [http/https]