ZyXEL Communications VANTAGE RADIUS 50, User Manual

Page: 44 / 214

Vantage RADIUS User’s Guide
3-10 Advanced Settings
Table 3-6 Time Settings
LABEL DESCRIPTION
Current Time
Year/Month/Day This field displays the date of your RADIUS.
Each time you reload this page, the RADIUS synchronizes the time with the time
server.
Hour: Minute: Second This field displays the time of your RADIUS.
Each time you reload this page, the RADIUS synchronizes the time with the time
server.
Date/Time
Date This field displays the last updated date from the time server if you have one
configured; otherwise use the drop down list boxes to manually set a date here.
Time This field displays the last updated time from the time server if you have one
configured; otherwise use the drop down list boxes to manually set a time here.
Set Date/Time Click this button to apply the manual date and time configured to the RADIUS
device.
Get from my PC Click this button to have the RADIUS obtain the current time and date from your
computer.
NTP Setup
Use NTP (Network
Time Protocol) Time
Server Enable the network time server to have the RADIUS automatically synchronize
the current rime and date with a time server.
Server IP/Domain
Name Type the address of your time server. Check with your ISP/network
administrator if you are unsure of this information.
Time Zone Choose the time setting of your location. This will set the time difference
between your time zone and Greenwich Mean Time (GMT).
Sync Time Every Type the time in minutes from 10 to 1440 to have the RADIUS synchronize the
time with the time server.
Synchronize Now Click this button to get the time and date from the time server you specified
above.
If there is no response from the time server, Vantage RADIUS attempts three
times to connect. If there is no response within approximately ten seconds,
check your time server settings and try again, or click
Get from my PC to obtain
the current time from your computer without the time server.