manualshive.com logo in svg

ZyXEL Communications VANTAGE CNM 2.0 -, User Manual

Share
Download
ZyXEL Communications VANTAGE CNM 2.0 - User Manual Download Page 313

Vantage CNM 2.0 User’s Guide

316

Appendix L

Open Software Announcements

Notice 

Information herein is subject to change without notice. Companies, names, and data used in 
examples herein are fictitious unless otherwise noted. No part may be reproduced or 
transmitted in any form or by any means, electronic or mechanical, for any purpose, except the 
express written permission of ZyXEL Communications Corporation.

This Product includes Castor

Copyright (C) 1999-2001  Intalio, Inc. All Rights Reserved.

Redistribution and use of this software and associated documentation ("Software"), with or 
without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain copyright statements and notices. Redistributions 
must also contain a copy of this document.

2. Redistributions in binary form must reproduce the above copyright notice, this list of 
conditions and the following disclaimer in the documentation and/or other materials provided 
with the distribution.

3. The name "ExoLab" must not be used to endorse or promote products derived from this 
Software without prior written permission of ExoLab Group. For written permission, please 
contact [email protected].

4. Products derived from this Software may not be called "ExoLab" nor may "ExoLab" appear 
in their names without prior written permission of ExoLab Group. Exolab is a registered 
trademark of ExoLab Group.

5.Due credit should be given to the ExoLab Group (

http://www.exolab.org

). 

THIS SOFTWARE IS PROVIDED BY INTALIO, INC. AND CONTRIBUTORS ''AS IS'' 
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
LIMITED TO, THE IMPLIED WARRANTIES OF ERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

Summary of Contents for VANTAGE CNM 2.0 -



























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands