ZyXEL Communications VANTAGE CNM 2.0 - User Manual Download Page 302

Page: 302 / 346

Vantage CNM 2.0 User’s Guide

305

Connecting to content

filter server fail

The connection to the external content filtering server failed.

License key is invalid

The external content filtering license key is invalid.

Table 142 Attack Logs

LOG MESSAGE

DESCRIPTION

attack [ TCP | UDP | IGMP

| ESP | GRE | OSPF]

The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF attack.

attack ICMP (type:%d,

code:%d)

The firewall detected an ICMP attack. For type and code details,

see Table 149

land [TCP | UDP | IGMP |

ESP | GRE | OSPF ]

The firewall detected a TCP/UDP/IGMP/ESP/GRE/OSPF land
attack.

land ICMP (type:%d,

code:%d)

The firewall detected an ICMP land attack. For type and code
details,

see Table 149

ip spoofing - WAN [ TCP |

UDP | IGMP | ESP | GRE |

OSPF]

The firewall detected an IP spoofing attack on the WAN port.

ip spoofing - WAN ICMP

(type:%d, code:%d)

The firewall detected an ICMP IP spoofing attack on the WAN port.
For type and code details,

see Table 149

icmp echo : ICMP

(type:%d, code:%d)

The firewall detected an ICMP echo attack. For type and code
details,

see Table 149

syn flood TCP

The firewall detected a TCP syn flood attack.

ports scan TCP

The firewall detected a TCP port scan attack.

teardrop TCP

The firewall detected a TCP teardrop attack.

teardrop UDP

The firewall detected an UDP teardrop attack.

teardrop ICMP (type:%d,

code:%d)

The firewall detected an ICMP teardrop attack. For type and code
details,

see Table 149

illegal command TCP

The firewall detected a TCP illegal command attack.

NetBIOS TCP

The firewall detected a TCP NetBIOS attack.

ip spoofing - no routing

entry [TCP | UDP | IGMP |

ESP | GRE | OSPF]

The firewall classified a packet with no source routing entry as an
IP spoofing attack.

ip spoofing - no routing

entry ICMP (type:%d,

code:%d)

The firewall classified an ICMP packet with no source routing entry
as an IP spoofing attack.

vulnerability ICMP

(type:%d, code:%d)

The firewall detected an ICMP vulnerability attack. For type and
code details,

see Table 149

traceroute ICMP (type:%d,

code:%d)

The firewall detected an ICMP traceroute attack. For type and
code details,

see Table 149

Table 141 Content Filtering Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for VANTAGE CNM 2.0 -



























































































































































































































































































































































Search results

Summary of Contents for VANTAGE CNM 2.0 -

Reviews:

Brands by name

Popular brands

ZyXEL Communications VANTAGE CNM 2.0 -, User Manual

Search results

Summary of Contents for VANTAGE CNM 2.0 -

Reviews:

Brands by name

Popular brands