Prestige 153/153X WAN Bridge/Routers
3-10
Chapter 3
Internet Access Application
Table 3-7 contain instructions on how to configure your Prestige for Internet Access.
Table 3-7.
Internet Access Setup Menu Fields
Field
Description
Observation
ISP's Name
Enter the name of your Internet Service Provider. (This information
is for identification purposes only.)
Myisp
ISP IP Addr
Enter the IP Address of the remote gateway at the ISP's site. If you
do not have this data, just leave it blank.
(optional)
Connection Type
Select [Switch] if a Dail-up modem is used to connect to your ISP.
Select [Leased] if a Leased Line is used to connect to your ISP.
Note that Prestige 153X supports [Switch-Async/Leased-
Async/Leased-Sync] as connection types.
Space-bar to
toggle
[Switch/Leased]
Leased Ports
If [Leased] is selected in Connection Type, enter the WAN Port
numbers in the Leased Line connection. Leased Port(s) can be a
single port: (1 to 3), or any combination of ports: (i.e. 1,2,3 or 1,3
etc). All leased WAN Ports specified here are bundled in one
connection to your ISP. The Connection Type of these WAN Ports
also must be specified as [Leased] in Menu 2.
Pri(mary) Phone #
The first number your Prestige will dial to connect to the ISP. Once
connected, your Prestige will use the BACP (Bandwidth Allocation
Control Protocol) to establish the second B-channel if PPP/MP is
enabled, and the ISP also supports MP and BACP.
(required)
Sec(ondary) Phone
#
If the Primary Phone number is busy or does not answer, your
Prestige will call the Secondary Phone number if available.
(optional)
My Login Name
Enter the login name assigned to you by your ISP.
(required)
My Password
Enter the password associated with the login name above. Note
that this login name/password pair is only for your Prestige to
connect to the ISP's gateway. When you use TCP/IP applications
(for example, FTP) to access the Internet from your workstation,
you will need a separate login name and password for each server.
(required)
