Prestige 153/153X WAN Bridge/Routers
2-20
Chapter 2
Hardware Installation & Initial Setup
Figure 2-12 shows an example of Sync/Async WAN port configuration for a [Switch-Async]
connection type.
Figure 2-12.
Prestige 153X Menu 2.1 - Sync/Async WAN Port Setup
Table 2-6 describes how to configure the Prestige 153X Async WAN ports.
Table 2-6.
Prestige 153X Sync/Async WAN Port Setup Menu Fields
Field
Description
Example
Modem Name
Enter a descriptive name for the Modem or ISDN TA connected to this
WAN Port.
ZyXEL
Active
Set to [Yes] to activate a WAN port, then your Prestige will initialize the
WAN Port and the attached Modem or ISDN TA. When a WAN Port is
deactivated, it has no effect on the operation of your Prestige, even
though its profile is still kept in the database, and can be activated in the
future.
Press space-bar
to toggle
[Yes/No]
Connection
Type
Select the connection type for your particular application. Select [Switch]
for Dial-up application or [Leased] for Leased Line Modem application.
When a Sync Device is connected, select [Leased-Sync] in Connection
Type. Then configure the Clock Source field accordingly by selecting
[Internal] or [External].
Press space-bar
to toggle
[Switch-Async]
[Leased-Async]
[Leased-Sync]
Menu 2.1 - Sync/Async WAN Port Setup
Modem Name= ZyXEL
Active= Yes
Connection Type= Switch-Async
Phone Number=
Clock Source= Internal/External
Device Type= 56K Modem
Port Speed= 115200
AT Command String:
Init= ats0=0
Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
