Prestige 153/153X WAN Bridge/Routers
2-18
Chapter 2
Hardware Installation & Initial Setup
Table 2-5.
Prestige 153 Async WAN Port Setup Menu Fields (continued)
AT Command
String: Init
Enter an AT command string to initialize the modem or ISDN TA attached
to the WAN Port. When the Connection Type is set to [Switch], you must
enter an AT command (ats0=0) to disable auto answer (i.e. ats0=0) or
your Prestige will answer the incoming phone call.
(Default: ats0=0)
Advanced
Setup
To edit the Advanced Setup for this Modem/ISDN TA, move the cursor to
this field, use the space bar to select [Yes] and press [Enter]. This will
bring you to Menu 2.1.1 - Advanced Setup.
[Yes/No]
When you complete this menu, press [Enter] to save your selections, or Esc to cancel. After you press
[Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected
Modem/ISDN TA.