Prestige 153/153X WAN Bridge/Routers
2-19
Chapter 2
Hardware Installation & Initial Setup
2.8.2 Prestige 153X WAN Port Setup
In addition to Async devices, Prestige 153X supports Sync Devices on two WAN ports. The WAN
ports 1 and 2 can be connected to an external Sync device such as a CSU/DSU or an Async
device such as a Modem or an ISDN TA. WAN Port 3 can only be connected to an Async. device.
Note on WAN Setup
Before you connect a leased line modem, ISDN TA, or CSU/DSU to your Prestige make sure to
configure the device accordingly. To configure the modem, ISDN TA, or CSU/DSU, refer to the
instructions provided by the manufacturer
To configure the WAN ports, go to Menu 2- WAN Port Setup as shown in Figure 2-11, and select
the number (1,2, or 3) of the WAN you wish to configure. Note that WAN port 1 and 2 have both
Sync/Async capabilities, while WAN port 3 is Async only.
Figure 2-11.
Prestige 153X Menu 2 - WAN Port Setup
Selecting WAN port 1 or 2 will bring up Menu 2.1 - Sync/Async WAN Port Setup, as shown in
Figure 2-12, while selecting WAN port 3 opens the standard Menu 2.1 - Async WAN Port Setup.
Menu 2 - WAN Port Setup
1. Wan Port 1 (Sync/Async)
2. Wan Port 2 (Sync/Async)
3. Wan Port 3 (Async Only)
Select WAN Port: