Prestige 153/153X WAN Bridge/Routers
2-17
Chapter 2
Hardware Installation & Initial Setup
Table 2-5 describes how to configure the WAN ports 1,2, and 3 with the Modem or ISDN TA
parameters.
Table 2-5.
Prestige 153 Async WAN Port Setup Menu Fields
Field
Description
Example
Modem Name
Enter a descriptive name for the Modem or ISDN TA connected to this
WAN Port.
ZyXEL
Active
Set to [Yes] to activate a WAN port, then your Prestige will initialize the
WAN Port and the attached Modem or ISDN TA. When a WAN Port is
deactivated, it has no effect on the operation of your Prestige, even
though its profile is still kept in the database, and can be activated in the
future.
Press space-bar
to toggle
[Yes/No]
Connection
Type
Select the connection type for your particular application. Select [Switch]
for Dial-up application or [Leased] for Leased Line Modem application.
Press space-bar
to toggle
[Switch/Leased]
Phone
Number
Enter the telephone number assigned to your modem line by your
telephone company. Note that your Prestige only accepts digits; do not
include dashes and spaces in this field.
5551212
(example)
Device Type
Use the space bar to select one of the following devices: Modem / ISDN
TA / X.25 PAD / 56K Modem. A Device Type is selected for the WAN Port
such that a Remote Node only picks up a free device of the selected type
to dial out. Only the WAN Ports of the same device type can be bundled.
This field is not applicable if the Connection Type is set to [Leased].
Space-bar to
toggle
[Modem]
[ISDN TA]
[X.25 PAD]
[56K Modem]
Port Speed
Use the space bar to select the maximum speed of your Modem or ISDN
TA.
Available speeds are:
9600 / 19200 / 38400 / 57600 / 115200 / 230000 bps
115200
(default)