ZyXEL Communications P-663H-51 User Manual Download Page 124

Page: 124 / 206

Chapter 18 Logs

P-663H-51 User’s Guide

124

Figure 70

Management > System Log > View System Log

The following table describes the fields in this screen.

18.4 Configuring Log Settings

Click

Management > System Log

Configure System Log

to display the following screen.

Use this screen to configure the level of events to log and where to send logs.

Figure 71

Management > System Log > Configure System Log

Table 50

Management > System Log > View System Log

LABEL

DESCRIPTION

Date/Time

This field displays when the log was recorded.

Facility

This is the log’s category.

Severity

This is the event’s degree of seriousness.

Message

This field states the reason for the log.

Refresh

Click

Refresh

to renew the log screen.

Click this to close the window.

Summary of Contents for P-663H-51















































































































































































































Search results

Summary of Contents for P-663H-51

Reviews:

Related manuals for P-663H-51

Brands by name

Popular brands

ZyXEL Communications P-663H-51, User Manual

Search results

Summary of Contents for P-663H-51

Reviews:

Related manuals for P-663H-51

Brands by name

Popular brands