manualshive.com logo in svg

ZyXEL Communications P-660HW-DX, User Manual

Share
Download
ZyXEL Communications P-660HW-DX User Manual Download Page 247

 Chapter 18 Logs

P-660HW-Dx User’s Guide

247

 

Table 108   

Certificate Path Verification Failure Reason Codes

CODE

DESCRIPTION

1

Algorithm mismatch between the certificate and the search constraints.

2

Key usage mismatch between the certificate and the search constraints.

3

Certificate was not valid in the time interval.

4

(Not used)

5

Certificate is not valid.

6

Certificate signature was not verified correctly.

7

Certificate was revoked by a CRL.

8

Certificate was not added to the cache.

9

Certificate decoding failed.

10

Certificate was not found (anywhere).

11

Certificate chain looped (did not find trusted root).

12

Certificate contains critical extension that was not handled. 

13

Certificate issuer was not valid (CA specific information missing).

14

(Not used)

15

CRL is too old.

16

CRL is not valid.

17

CRL signature was not verified correctly.

18

CRL was not found (anywhere).

19

CRL was not added to the cache.

20

CRL decoding failed.

21

CRL is not currently valid, but in the future.

22

CRL contains duplicate serial numbers.

23

Time interval is not continuous.

24

Time information not available.

25

Database method failed due to timeout.

26

Database method failed.

27

Path was not verified.

28

Maximum path length reached.

Table 109   

ACL Setting Notes

PACKET DIRECTION

DIRECTION

DESCRIPTION

(L to W)

LAN to WAN

ACL set for packets traveling from the LAN to the WAN.

(W to L)

WAN to LAN

ACL set for packets traveling from the WAN to the LAN.

(L to L)

LAN to LAN/

ZyXEL Device

ACL set for packets traveling from the LAN to the LAN or 

the ZyXEL Device.

(W to W)

WAN to WAN/

ZyXEL Device

ACL set for packets traveling from the WAN to the WAN 

or the ZyXEL Device.

Summary of Contents for P-660HW-DX













































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands