ZyXEL Communications P-660HN-F1, User Manual

Page: 240 / 366

Chapter 24 Backup/Restore
ADSL Series User’s Guide
240
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your ZyXEL Device.
Do not turn off the ZyXEL Device while configuration file upload is in
progress.
After the ZyXEL Device configuration has been restored successfully, the login screen appears.
Login again to restart the ZyXEL Device.
The ZyXEL Device automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 130
Network Temporarily Disconnected
If you restore the default configuration, you may need to change the IP address of your computer
to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix B on
page 273 for details on how to set up your computer’s IP address.
If the upload was not successful, an error screen will appear. Click OK to go back to the
Configuration screen.
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the ZyXEL
Device to its factory defaults. The following warning screen appears.
Figure 131
Reset Warning Message
Wait until the ZyXEL Device’s login screen appears. You can also press the RESET button on the
rear panel to reset the factory defaults of your ZyXEL Device. Refer to
Section 1.6 on page 25 for
more information on the RESET button.
Table 83
Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click this to begin the upload process.
Reset Click this to reset your device settings back to the factory default.