ZyXEL Communications P-660HN-F1, User Manual

Page: 206 / 366

Chapter 16 VPN
ADSL Series User’s Guide
206
The following table describes the fields in this screen.
16.3 The VPN Edit Screen
Click on Add New Tunnel in the VPN Setup screen or click on the Edit icon to edit VPN policies.
Both commands share the same screen.
Table 62
Security > VPN > Setup
LABEL DESCRIPTION
Add New Tunnel Click this button to set up VPN policies for a new tunnel
# This is the VPN policy index number. Click a number to edit VPN policies.
Active This field displays whether the VPN policy is active or not. A Yes signifies that this VPN
policy is active. No signifies that this VPN policy is not active.
Tunnel Name This field displays the identification name for this VPN policy.
Local Address This field will display the IP address used by the ZyXEL Device.
Remote Address This field will display the Secure Gateway Address of the IPSec router with which you're
making the VPN connection
IPSec Algorithm This field displays the encryption algorithm used for an SA.
Both AH and ESP increase ZyXEL Device processing requirements and communications
latency (delay).
Modify Click the Edit icon to go to the screen where you can edit the VPN configuration.
Click the Remove icon to remove an existing VPN configuration.
Apply Click this to save your changes and apply them to the ZyXEL Device.
Cancel Click this return your settings to their last saved values.