ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 163 / 272

Chapter 16 Universal Plug-and-Play (UPnP)
P-660H-T1v3s User’s Guide
163
16.2 The UPnP Screen
Use the following screen to configure the UPnP settings on your P-660H-T1v3s.
Click Advanced > UPnP to display the screen shown next.
See Section 16.1 on page 161 for more information.
Figure 68 Advanced > UPnP > General
The following table describes the fields in this screen.
Table 50 Advanced > UPnP > General
LABEL DESCRIPTION
Active the Universal Plug
and Play (UPnP) Feature Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the P-660H-T1v3s's IP address
(although you must still enter the password to access the web
configurator).
Allow users to make
configuration changes
through UPnP Select this check box to allow UPnP-enabled applications to
automatically configure the P-660H-T1v3s so that they can
communicate through the P-660H-T1v3s, for example by
using NAT traversal, UPnP applications automatically reserve a
NAT forwarding port in order to communicate with another
UPnP enabled device; this eliminates the need to manually
configure port forwarding for the UPnP enabled application.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.