ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 132 / 272

Chapter 11 Static Route
P-660H-T1v3s User’s Guide
132
11.2 The Static Route Screen
Use this screen to view the static route rules. Click Advanced > Static Route to
open the Static Route screen.
Figure 51 Advanced > Static Route
The following table describes the labels in this screen.
Table 34 Advanced > Static Route
LABEL DESCRIPTION
Destination This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
Netmask This parameter specifies the IP network subnet mask of the final
destination.
Gateway This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
Modify Click the Edit icon to go to the screen where you can set up a static route
on the P-660H-T1v3s.
Click the Remove icon to remove a static route from the P-660H-T1v3s.
A window displays asking you to confirm that you want to delete the
route.