ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 110 / 272

Chapter 8 Network Address Translation (NAT)
P-660H-T1v3s User’s Guide
110
The following table describes the fields in this screen.
Table 23 Network > NAT > Port Forwarding
LABEL DESCRIPTION
Default Server Setup
Default
Server
In addition to the servers for specified services, NAT supports a default
server. A default server receives packets from ports that are not
specified in this screen. If you do not assign a Default Server IP
address, the P-660H-T1v3s discards all packets received for ports that
are not specified here or in the remote management setup.
Port Forwarding
Service
Name
Select a service from the drop-down list box.
Server IP
Address
Enter the IP address of the server for the specified service.
Add Click this button to add a rule to the table below.
# This is the rule index number (read-only).
Active This field indicates whether the rule is active or not.
Clear the check box to disable the rule. Select the check box to enable
it.
Service
Name
This is a service’s name.
Start Port This is the first port number that identifies a service.
End Port This is the last port number that identifies a service.
Port
Translation
Start Port
This is the first port number that identifies the range of ports managed
by the port address translation service.
Port
Translation
End Port
This is the last port number that identifies the range of ports managed
by the port address translation service.
Server IP
Address
This is the server’s IP address.
Modify Click the edit icon to go to the screen where you can edit the port
forwarding rule.
Click the delete icon to delete an existing port forwarding rule. Note that
subsequent address mapping rules move up by one when you take this
action.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.