ZyXEL Communications P-660H-T1 v3s, User Manual

Page: 157 / 272

Chapter 15 Remote Management
P-660H-T1v3s User’s Guide
157
The following table describes the labels in this screen.
15.6 The DNS Screen
Use DNS (Domain Name System) to map a domain name to its corresponding IP
address and vice versa. Refer to
Chapter 7 on page 89 for background
information.
Use this screen to set from which IP address the P-660H-T1v3s will accept DNS
queries and on which interface it can send them your P-660H-T1v3s’s DNS
settings. This feature is not available when the P-660H-T1v3s is set to bridge
mode. Click Advanced > Remote MGMT > DNS to change your P-660H-T1v3s’s
DNS settings.
Figure 66 Advanced > Remote Management > DNS
Table 47 Advanced > Remote MGMT > SNMP
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Server Access Select the interface(s) through which a computer may access the P-
660H-T1v3s using this service.
Secured Client IP
Address A secured client is a “trusted” computer that is allowed to
communicate with the P-660H-T1v3s using this service.
Select All to allow any computer to access the P-660H-T1v3s using
this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the P-660H-T1v3s using this service.
Apply Click to save your changes.
Reset Click to restore your previously saved settings.