ZyXEL Communications P-128IMH, User Manual, Page: 53 / 191

Prestige 128IMH ISDN Modem/ Router/Hub
Hardware Installation and Setup 2-17
Figure 2-9 Menu 2 – ISDN Setup
Table 2-5 Menu 2 – ISDN Setup
Switch Type This field is fixed as DSS1.
B Channel Usage In general, this is Switch/Switch . If you are only using one B channel
(e.g., your Prestige is sharing the ISDN BRI line with another device
on the S/T bus), then select
Switch/Unused . The default is
Switch/Switch.
ISDN Data &
Subaddress Enter the telephone number and the subaddress assigned to ISDN
data calls for the Prestige. The maximum number of digits is 19 for
the telephone number and 5 for the subaddress.
A/B Adapter 1 &
Subaddress Enter the telephone number and the subaddress assigned to A/B
Adapter 1 (PHONE1).
A/B Adapter 2 &
Subaddress Same as above for A/B Adapter 2 (PHONE2).
PABX Outside Line
Prefix Enter the number for outside line access if the Prestige is connected
to a PABX; otherwise, leave it blank. The maximum number of digits
is 4.
Outgoing Calling
Party Number You only need to fill in this field if your switch requires a specific
Outgoing Calling Party Number ; otherwise, leave it blank.
Incoming Phone
Number Matching Determines how incoming calls are routed. The choices for this field
are
Multiple Subscriber Number (MSN) , Called Party Subaddress
and Don’t Care .
Analog Call Routing Select the destination for analog calls. The choices are A/B Adapter
1 , A/B Adapter 2 and Ignore . This field is only applicable when
Incoming Phone Number Matching is Don’t Care .
Global Analog Call Select how to handle global analog calls. The choices are Accept
and Ignore . This field is not applicable when the Analog Call
Routing is Ignore .
Edit Advanced Setup Select Yes and press Enter to go to the advanced setup submenu.
2.8.8 Advanced Setup
Select
Yes
in the Advanced Setup field of Menu 2 – ISDN Setup above to display menu 2.1
below.