ZyXEL Communications P-128IMH, User Manual, Page: 111 / 191

Prestige 128IMH ISDN Modem/ Router/Hub
Dial-I n Server Configuration 8-3
8.2 LAN-to-LAN Server Application
Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide
access for the workstations on a remote network. For your Prestige to be set up as a LAN-to-
LAN server, you need to configure the Default Dial-In Setup to set the operational parameters
for incoming calls. Additionally, you must create a remote node for the router on the remote
network ( see
Chapter 5 - Remote Node Configuration
).
An example of your Prestige being used as a LAN-to-LAN server is shown below.
Figure 8-2 Example of a LAN-to-LAN Server Application
Prestige Prestige
Remote Network Local Network
LAN-to-LAN
Server