ZyXEL Communications P-128IMH, User Manual, Page: 24 / 191

Prestige 128IMH ISDN Modem/ Router/Hub
xxiv Preface
If you have an ISDN line installed and working, you can reference the following sections to
insure that your line is set up properly to allow all the features of your Prestige to operate.
To order a new ISDN line, do the following:
1. Contact your local telephone company’s ISDN Ordering Center to find out what type of ISDN
service is available and the switch type.
2. Provide your telephone company with the line provisioning information for that switch type,
which can be found at Chapter 15 of this manual. This insures proper operation of all of the
Prestige’s features with the ISDN line.
3. When the telephone company installs your ISDN line, please be sure to obtain and write down the
following information for future use:
•
ISDN switch type
•
ISDN telephone number(s)
Completing the Setup Information Worksheet
Before you continue, locate the worksheet at Chapter 15 . This information worksheet has been
provided to help you collect the necessary information needed for setup and installation in the
following chapters.
Collecting General Setup Information
The Prestige requires certain system information. You can obtain all the pertinent information
from your network administrator. Record this information into the worksheet as it becomes
available. This worksheet will later be referred to as you configure your Prestige.
System Name - This is the name given to the Prestige for identification purposes. This name
should be no more than 8 alphanumeric characters. Spaces are not allowed, but ‘-’ and ‘_’ are
accepted.
Route IP Field - For Internet access, you need to enable the Route IP Field.
You have now collected all of the general setup information you need. Please make sure that you
have entered all the values onto the worksheet before proceeding to the next section.