ZyXEL Communications NBG7815, User Manual, Page: 122 / 186

Chapter 11 LAN
NBG7815 User’s Guide
122
11.4.1 Static DHCP Table-Add/Edit Rule
Use this screen to configure the static DHCP. Click Settings > LAN > LAN IP > Add Rule or Settings > LAN >
> LAN IP > Edit to show the following screens.
Note: This is not available if you are using bridge mode.
DHCP Pool Size This field specifies the size, or count of the IPv4 address pool for LAN.
DNS Server
DNS Servers Assigned by DHCP Server
First DNS Server
Second DNS Server
Third DNS Server
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and the
NBG7815's WAN IP address). The field to the right displays the (read-only) DNS server IP
address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP
address in the field to the right.
Select LAN IP and the field to the right displays the (read-only) default gateway IP address of
your computer.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
Static DHCP Table
Note: This is not available if you are using bridge mode.
No. This is the index number of the static IP table entry (row).
Name This field displays a name to identify this rule.
MAC Address This field displays the MAC address of a computer on your LAN, or the MAC address you
manually configured.
IP Address This field displays the LAN IP address of a computer on your LAN, or the LAN address you
manually configured.
Actions Click the icons under Actions to delete or edit an existing static IP.
Click to delete an existing static IP.
Click to edit an existing static IP.
APPLY Click APPLY to save your changes back to the NBG7815.
CANCEL Click CANCEL to begin configuring this screen afresh.
Table 42 Settings > LAN > LAN IP (continued)
LABEL DESCRIPTION