Chapter 22 USB Media Sharing
NBG6716 User’s Guide
159
22.7 FTP Screen
Use this screen to set up file sharing via the NBG6716 using FTP and create user accounts. Click
Management > USB Media Sharing > FTP
.
Figure 117
Management > USB Media Sharing > FTP
The following table describes the labels in this screen.
Enable
This field displays whether a user account is activated or not. Select the check box to
enable the account. Clear the check box to disable the account.
User Name
Enter a user name that will be allowed to access the shared files. You can enter up to 20
characters. Only letters and numbers allowed.
Password
Enter the password used to access the shared files. You can enter up to 20 characters.
Only letters and numbers are allowed. The password is case sensitive.
USB1/2
Select the USB port(s) of the NBG6716. The configured user can access the files on the
USB device(s) connected to the selected USB port(s) only.
Apply
Click
Apply
to save your changes back to the NBG6716.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 66
Management > USB Media Sharing > SAMBA (continued)
LABEL
DESCRIPTION
Table 67
Management > USB Media Sharing > FTP
LABEL
DESCRIPTION
Enable FTP
Select this to enable the FTP server on the NBG6716 for file sharing using FTP.
Port
You may change the server port number for FTP if needed, however you must use the
same port number in order to use that service for file sharing.
User Accounts
Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
#
This is the index number of the user account.
