Chapter 20 Remote Management
NBG6716 User’s Guide
147
Use this screen to remotely turn on a device on the network. Click the
Management > Remote
MGMT > Wake On LAN
to open the following screen.
Figure 102
Management > Remote MGMT > Wake On LAN
The following table describes the labels in this screen.
Table 63
Management > Remote MGMT > Wake On LAN
LABEL
DESCRIPTION
Wake On LAN over WAN
Settings
Enable WOL over WAN
Select this option to have the NBG6716 forward a WoL “Magic Packet” to all
devices on the LAN if the packet comes from the WAN or remote network and
uses the port number specified in the
Port
field. A LAN device whose hardware
supports Wake on LAN then will be powered on if it is turned off previously.
Port
Type a port number from which a WoL packet is forwarded to the LAN.
Wake On LAN
Wake MAC Address
Enter the MAC Address of the device on the network that will be turned on.
A MAC address consists of six hexadecimal character pairs.
Start
Click this to have the NBG6716 generate a WoL packet and forward it to turn
the specified device on.
A screen pops up displaying MAC address error if you input the MAC address
incorrectly.
Apply
Click
Apply
to save the setting to the NBG6716.
Cancel
Click
Cancel
to begin configuring this screen afresh.
