ZyXEL Communications LTE5121, User Manual

Page: 106 / 234

Chapter 9 Quality of Service (QoS)
LTE-5121 User’s Guide
106
The following table describes the labels in this screen.
9.3.1 Add/Edit a QoS Queue
Use this screen to configure a queue. Click Add new queue in the Queue Setup screen or the
Edit icon next to an existing queue.
Figure 72
Queue Setup: Add/Edit
The following table describes the labels in this screen.
Table 34
Network Setting > QoS > Queue Setup
LABEL DESCRIPTION
Add new
Queue Click this to create a new entry.
# This is the index number of this entry.
Status This indicates whether the queue is active or not.
A yellow bulb signifies that this queue is active. A gray bulb signifies that this queue
is not active.
Name This shows the descriptive name of this queue.
Interface This shows the name of the LTE Device’s interface through which traffic in this
queue passes.
Priority This shows the priority of this queue.
Weight This shows the weight of this queue.
Buffer
Management This shows the queue management algorithm used by the LTE Device.
Rate Limit
(kbps) This shows the maximum transmission rate allowed for traffic on this queue.
Modify Click the Edit icon to edit the queue.
Click the Delete icon to delete an existing queue. Note that subsequent rules move
up by one when you take this action.
Table 35
Queue Setup: Add/Edit
LABEL DESCRIPTION
Active Select to enable or disable this queue.
Name Enter the descriptive name of this queue.
Interface This shows the interface of this queue.