manualshive.com logo in svg

ZyXEL Communications LTE3202-M430, User Manual, Page: 93 / 117

Share
Download
ZyXEL Communications LTE3202-M430 User Manual Download Page 93

 Chapter 14 System

LTE3202-M430 User’s Guide

93

Do NOT turn off the LTE3202-M430 while firmware upload is in progress!

Figure 69   

Maintenance > Firmware Upgrade 

14.6  The Settings Profile Screen

The 

Settings Profile

 screen allows you to backup and restore device configurations. You can also reset 

your device settings back to the factory defaults. To access this screen, click 

Maintenance > Settings 

Profile

.

Figure 70   

Maintenance > Settings Profile

14.6.1  Reset Settings

Click the 

Restore 

button to clear all user-entered configuration information and return the LTE3202-M430 

to its factory defaults. The LTE3202-M430 automatically restarts.

You can also press the 

Reset

 button on the rear panel to reset the factory defaults of your LTE3202-M430. 

Refer to 

Section 1.5.2.3 on page 13

 for more information on the 

Reset

 button.

Summary of Contents for LTE3202-M430






















































































































Reviews:

No comments