ZyXEL Communications LTE3202-M430, User Manual, Page: 61 / 117

Chapter 8 WLAN
LTE3202-M430 User’s Guide
61
Figure 39 WPS: Example Network Step 1
In step 2 , you add another wireless client to the network. You know that Client 1 supports registrar mode,
but it is better to use AP1 for the WPS handshake with the new client since you must connect to the
access point anyway in order to use the network. In this case, AP1 must be the registrar, since it is
configured (it already has security information for the network). AP1 supplies the existing security
information to Client 2 .
Figure 40 WPS: Example Network Step 2
In step 3, you add another access point ( AP2 ) to your network. AP2 is out of range of AP1 , so you cannot
use AP1 for the WPS handshake with the new access point. However, you know that Client 2 supports
the registrar function, so you use it to perform the WPS handshake instead.
REGISTRAR ENROLLEE
SECURITY INFO
CLIENT 1
AP1
LTE
REGISTRAR
CLIENT 1 AP1
ENROLLEE
CLIENT 2
EXISTING CONNECTION
SEC
URI
TY I
NFO
LTE