Chapter 8 WLAN
LTE3202-M430 User’s Guide
50
8.3 MAC Filter Screen
This screen allows you to configure the LTE3202-M430 to exclude specific devices from accessing the
LTE3202-M430 (
Deny
). Every Ethernet device has a unique MAC (Media Access Control) address. The
MAC address is assigned at the factory and consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen.
Use this screen to view your LTE3202-M430’s MAC filter settings and add new MAC filter rules. Click
Configuration > WLAN > MAC Filter
. The screen appears as shown.
Figure 33
Configuration > WLAN > MAC Filter
Cypher mode
Select the type of security you want to use (
TKIP
or
AES
) to secure traffic on your WDS. Otherwise,
select
No Security
.
Select
TKIP
to enable Temporal Key Integrity Protocol (TKIP) security on your WDS. This option is
compatible with other ZyXEL access points that support WDS security. Use this if the other access
points on your network support WDS security but do not have an AES option.
AES provides superior security to TKIP. Use
AES
if the other access points on your network support
it for the WDS.
WIFI key
Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces and
symbols).
You must also set the peer device to use the same pre-shared key.
Apply Click
Apply
to save your changes back to the LTE3202-M430.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 21 Configuration > WLAN > WiFi Settings
LABEL
DESCRIPTION
Summary of Contents for LTE3202-M430
Page 8: ...8 PART I User s Guide...
Page 21: ...21 PART II Technical Reference...