ZyXEL Communications IES-1248-51A, User Manual

Page: 192 / 654

Chapter 22 Multicast VLAN
IES-1248-51V User’s Guide
192
Active This field shows whether this multicast VLAN is active (Yes) or
inactive (No).
Name This field shows the name of this multicast VLAN.
Delete Select the check boxes of the rule(s) that you want to remove in the
Delete column and then click the Delete button.
You cannot delete a VLAN if any PVIDs are set to use the VLAN or the
VLAN is the CPU (management) VLAN.
Cancel Click Cancel to begin configuring the fields afresh.
Active Select this if you want the multicast VLAN to be active. Clear this if
you want the multicast VLAN to be inactive.
Name Enter a descriptive name for the multicast VLAN. The name can be 1-
31 printable ASCII characters long. Spaces are not allowed.
VLAN ID Enter the VLAN ID of the multicast VLAN; the valid range is between 1
and 4094.
Port This field displays each port number.
Control Select Fixed for the port to be a permanent member of this multicast
VLAN. Use the Select All button to include every port.
Select Forbidden if you want to prohibit the port from joining this
multicast VLAN. Use the Select All button to include every port.
Tagging Select TX Tagging if you want the port to tag all outgoing frames
transmitted with this VLAN ID. Use the All button to include every
port. Use the None button to clear all of the ports check boxes.
Add Click Add to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring the fields afresh.
Table 46 MVLAN Setup (continued)
LABEL DESCRIPTION