ZyXEL Communications IES-1248-51A, User Manual

Page: 535 / 654

IES-1248-51V User’s Guide
535
C
H A P T E R
6 7
ACL Commands
An ACL (Access Control Logic) profile allows the system to classify and perform
actions on the upstream traffic. Use the ACL Profile commands to set up ACL
profiles and the ACL Assignment commands to apply them to PVCs.
67.1 ACL Profile Commands
Use these commands to set up ACL profiles.
The following table describes common required values in ACL commands. Other
values are discussed with the corresponding commands.
Table 202 ACL Command Input Values
LABEL DESCRIPTION
name
The name of the ACL profile.
rule
The rule that classifies traffic flows.
action
One or more actions to perform on the classified packets. You can
select one or more of the following actions.
rate < rate
> = Sets the transmission rate (1~65535 in kbps) for the
matched traffic.
rvlan < rvlan >
= Replaces the VLAN ID with this VLAN ID (1~4094).
rpri < rpri >
= Replaces the priority with this priority (0 ~7) of the
matched packets.
deny
= Drops the packets.