ZyXEL Communications IES-1248-51A, User Manual

Page: 364 / 654

Chapter 50 How to Access and Use the CLI
IES-1248-51V User’s Guide
364
2
Open a Telnet session to the IES-1248-51V’s IP address. If this is your first login,
use the default values.
Make sure your computer IP address is in the same subnet, unless you are
accessing the IES-1248-51V through one or more routers. In the latter case,
make sure remote management of the IES-1248-51V is allowed via Telnet.
50.1.3 SSH
You can use this method if your IES-1248-51V supports SSH connections.
1
Connect your computer to one of the Ethernet ports.
2
Use a SSH client program to access the IES-1248-51V. If this is your first login,
use the default values in
Table 129 on page 364 and Table 130 on page 364 . Make
sure your computer IP address is in the same subnet, unless you are accessing the
IES-1248-51V through one or more routers.
50.2 Logging in
Use the administrator username and password. If this is your first login, use the
default values. in some IES-1248-51V models you may not need to enter the user
name.
The IES-1248-51V automatically logs you out of the management interface after
five minutes of inactivity. If this happens, simply log back in again. Use the
sys
stdio set
command to extend the idle timeout. For example, the IES-1248-51V
automatically logs you out of the management interface after 60 minutes of
inactivity after you use the
sys stdio set 60
command. Use the
sys stdio
show
command to display the current idle timeout setting.
Table 129 Default Management IP Address
SETTING
DEFAULT
VALUE
IP Address 192.168.1.1
Subnet Mask 255.255.255.0
Table 130 Default User Name and Password
SETTING
DEFAULT
VALUE
User Name admin
Password 1234