ZyXEL Communications IES-1248-51A, User Manual

Page: 516 / 654

Chapter 66 Virtual Channel Commands
IES-1248-51V User’s Guide
516
66.2 Virtual Channel Profile Commands
Use the following commands to configure virtual channel profiles.
vlan-id
This is the VLAN Identifier (1 – 4094) added to routed Ethernet
frames. Each PVC must have a unique
vlan-id
since the IES-1248-
51V forwards traffic back to the subscribers based on the VLAN ID.
vpi, vci
The Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI)
identify a channel on this port.
Possible values for the VPI are 0~255. This PVC channel is for internal
use. The subscriber does not need to create this PVC.
Possible values for the VCI are 32~65535 if the VPI is 0. If the VPI is
not 0, possible values for the VCI are 1~65535. This PVC channel is
for internal use. The subscriber does not need to create this PVC.
Table 194 Virtual Channel Command Input Values
LABEL DESCRIPTION
Table 195 Virtual Channel Profile Commands
COMMAND DESCRIPTION P
adsl vcprofile show
[ vcprofile ]
Displays the settings of the specified virtual channel profile (or all
of them if you do not specify one). L/L
adsl vcprofile set
< vcprofile >
<vc|llc><ubr|cbr><pcr>
<cdvt>
Creates a virtual channel profile.
ubr|cbr:
Specify either a unspecified bit rate (UBR) or constant
bit rate (CBR).
H/H