Chapter 28 PPPoE
GS2200 Series User’s Guide
220
28.3 PPPoE Intermediate Agent
Use this screen to configure the Switch to give a PPPoE termination server additional subscriber
information that the server can use to identify and authenticate a PPPoE client.
Click Advanced Application > PPPoE > Intermediate Agent in the navigation panel to display
the screen as shown.
Figure 143
Advanced Application > PPPoE > Intermediate Agent
The following table describes the labels in this screen.
Table 86
Advanced Application > PPPoE > Intermediate Agent
LABEL
DESCRIPTION
Active
Select this option to enable the PPPoE intermediate agent globally on the Switch.
access-node-
identifier
Enter up to 20 ASCII characters to identify the PPPoE intermediate agent. Hyphens (-) and
spaces are also allowed. The default is the Switch’s host name.
circuit-id
Use this section to configure the Circuit ID field in the PADI and PADR packets.
The Circuit ID you configure for a specific port or for a specific VLAN on a port has priority
over this.
The Circuit ID you configure for a specific port (in the Advanced Application > PPPoE >
Intermediate Agent > Port screen) or for a specific VLAN on a port (in the Advanced
Application > PPPoE > Intermediate Agent > Port > VLAN screen) has priority over
this. That means, if you also want to configure PPPoE IA Per-Port or Per-Port Per-VLAN
setting, leave the fields here empty and configure circuit-id and remote-id in the Per-Port or
Per-Port Per-VLAN screen.
Active
Select this option to have the Switch add the user-defined identifier string and variables
(specified in the option field) to PADI or PADR packets from PPPoE clients.
If you leave this option unselected and do not configure any Circuit ID string (using CLI
commands) on the Switch, the Switch will use the string specified in the access-node-
identifier field.
identifier-
string
Specify a string that the Switch adds in the Agent Circuit ID sub-option. You can enter up to
53 ASCII characters. Spaces are allowed.
Summary of Contents for GS2200 Series
