ZyXEL Communications GS-2724, User Manual

Page: 74 / 348

Chapter 7 Basic Setting
GS-2724 User’s Guide
74
Figure 26 General Setup
The following table describes the labels in this screen.
Table 9 General Setup
LABEL DESCRIPTION
System Name Choose a descriptive name for identification purposes. This name consists of up to
64 printable characters; spaces are allowed.
Location Enter the geographic location of your Switch. You can use up to 32 printable ASCII
characters; spaces are allowed.
Contact Person's
Name
Enter the name of the person in charge of this Switch. You can use up to 32
printable ASCII characters; spaces are allowed.
Login
Precedence
Use this drop-down list box to select which database the Switch should use (first) to
authenticate an administrator (user for Switch management).
Configure the local user accounts in the
Access Control Logins screen. The
RADIUS is an external server. Before you specify the priority, make sure you have
set up the corresponding database correctly first.
Select
Local Only to have the Switch just check the administrator accounts
configured in the Access Control Logins screen.
Select Local then RADIUS to have the Switch check the administrator accounts
configured in the Access Control Logins screen. If the user name is not found,
the Switch then checks the user database on the specified RADIUS server. You
need to configure Port Authentication Radius first.
Select RADIUS Only to have the Switch just check the user database on the
specified RADIUS server for a login username, password and the access privilege.