ZyXEL Communications GS-2724 User Manual Download Page 215

Page: 215 / 348

Chapter 32 Cluster Management

GS-2724 User’s Guide

215

Figure 116

Clustering Management Configuration

The following table describes the labels in this screen.

Table 81

Clustering Management Configuration

LABEL

DESCRIPTION

Clustering Manager

Active

Select

Active

to have this Switch become the cluster manager switch. A cluster

can only have one manager. Other (directly connected) switches that are set to

be cluster managers will not be visible in the

Clustering Candidates

list. If a

switch that was previously a cluster member is later set to become a cluster

manager, then its

Status

is displayed as

Error

in the

Cluster Management

Status

screen and a warning icon (

) appears in the member summary list

below.

Name

Type a name to identify the

Clustering Manager.

You may use up to 32

printable characters (spaces are allowed).

VID

This is the VLAN ID and is only applicable if the Switch is set to

802.1Q

VLAN.

All switches must be directly connected and in the same VLAN group to belong

to the same cluster. Switches that are not in the same VLAN group are not

visible in the

Clustering Candidates

list. This field is ignored if the

Clustering

Manager

is using

Port-based

VLAN.

Summary of Contents for GS-2724





























































































































































































































































































































































Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands

ZyXEL Communications GS-2724, User Manual

Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands