ZyXEL Communications GS-2724 User Manual Download Page 248

Page: 248 / 348

Chapter 38 Introducing Commands

GS-2724 User’s Guide

248

mac-filter

name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both>
inactive

Enables the specified MAC-filter

rule.

name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src|dst|both>

Disables the specified MAC filter

rule.

mac-forward

name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>

Removes the specified MAC

forwarding entry, belonging to a

VLAN group (if any) forwarded

through an interface(s).

name <name> mac
<mac-addr> vlan
<vlan-id>
interface
<interface-id>
inactive

Enables the specified MAC

address, belonging to a VLAN

group (if any) forwarded through

an interface(s).

mirror-port

Disables port mirroring on the

Switch.

mrstp

Disables the specified STP

configuration.

mrstp

interface
<port-list>

Disables the STP assignment

from the specified port(s).

multi-login

Disables another administrator

from logging into Telnet or the

CLI.

mvr <vlan-id>

Disables MVR on the Switch.

policy <name>

Deletes the policy. A policy sets

actions for the classified traffic.

inactive

Enables a policy.

port-access-
authenticator

Disables port authentication on

the Switch.

<port-list>

Disables authentication on the

listed ports.

<port-list>
reauthenticate

Disables the re-authentication

mechanism on the listed port(s).

port-security

Disables port security on the

device.

<port-list>

Disables port security on the

specified ports.

<port-list>
learn inactive

Enables MAC address learning

on the specified ports.

radius-server

<index>

Disables the use of

authentication from the specified

RADIUS server.

Table 90

Command Summary: Configuration Mode (continued)

COMMAND

DESCRIPTION

PRIVILEG

Summary of Contents for GS-2724





























































































































































































































































































































































Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands

ZyXEL Communications GS-2724, User Manual

Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands