ZyXEL Communications G-570U, User Manual

Page: 30 / 162

ZyXEL G-570U User’s Guide
30 Chapter 1 Getting to Know Your G-570U
1.5 The Rear Panel
Figure 9 G-570U: Rear Panel
The following table describes the rear panel of the G-570U.
G Green On The G-570U has an active IEEE 802.11b/g wireless
connection, but is not transmitting or receiving data.
Off The G-570U does not have an active IEEE 802.11b/g
wireless connection.
Blinking The G-570U has an active IEEE 802.11b/g wireless
connection and is transmitting or receiving data.
A and G Green Both LEDs
blinking in
series
OTIST (One-Touch Intelligent Security Technology) is in
progress.
Both LEDs
blinking
simultaneously
OTIST (One-Touch Intelligent Security Technology) is
complete and the G-570U is attempting to connect to an
access point.
Table 1 Front Panel LED Description
LED COLOR STATUS DESCRIPTION
Table 2 G-570U: Rear Panel
LABEL DESCRIPTION
A POWER port
B RESET button Hold this button in for 1-2 seconds to restart the G-570U. Your
settings will be saved.
Hold this button in for 10 seconds or more to reset the device. All
settings will be returned to factory defaults.
C OTIST button When the G-570U is in AP mode, click this button once to activate
OTIST.
In any mode, double-click this button to enter Wireless Client mode
and activate OTIST.
D ETHERNET port
E Detachable 2dBi antenna