ZyXEL Communications eir F1000, User Manual

Page: 249 / 359

249
eir F1000 Modem User
’s Guide
2 8
Remote Management
28.1 Overview
Remote management controls through which interface(s), which services can access the Device.
Note: The Device is managed using the Web Configurator.
28.2 The Remote MGMT Screen
Use this screen to configure through which interface(s), which services can access the Device. You
can also specify the port numbers the services must use to connect to the Device. Click
Maintenance > Remote MGMT to open the following screen.
Figure 147
Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 114
Maintenance > Remote MGMT
LABEL DESCRIPTION
WAN Interface
used for
services Select Any WAN to have the Device automatically activate the remote management service
when any WAN connection is up.
Select Multi WAN and then select one or more WAN connections to have the Device
activate the remote management service when the selected WAN connections are up.
HTTP This is the service you may use to access the Device.
LAN/WLAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the LAN/WLAN.
WAN Select the Enable check box for the corresponding services that you want to allow access to
the Device from the WAN.