ZyXEL Communications ATP200 User Manual Download Page 757

Page: 757 / 852

Chapter 38 Log and Report

ZyWALL ATP Series User’s Guide

757

38.3.4 Edit Remote Server Log Settings

The

Log Settings Edit

screen controls the detailed settings for each log in the remote server (syslog). Go

to the

Log Settings Summary

screen (see

Section 38.3.1 on page 751

), and click a remote server

Edit

icon.

Figure 522

Configuration > Log & Report > Log Setting > Edit (Remote Server - AC)

Log Category

This field displays each category of messages. The

Default

category includes debugging

messages generated by open source software.

Selection

Select what information you want to log from each

Log Category

(except

All Logs

; see below).

Choices are:

disable all logs

(red X) - do not log any information from this category

enable normal logs

(green check mark) - log regular information and alerts from this category

enable normal logs and debug logs

(yellow check mark) - log regular information, alerts, and

debugging information from this category

Click this to save your changes and return to the previous screen.

Cancel

Click this to return to the previous screen without saving your changes.

Table 336 Configuration > Log & Report > Log Setting > Edit (USB Storage) (continued)

LABEL

DESCRIPTION

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands

ZyXEL Communications ATP200, User Manual

Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands