Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
89
Figure 26
Network Setting > Wireless > General
The following table describes the labels in this screen.
Table 16
Network Setting > Wireless > General
LABEL
DESCRIPTION
Wireless Network Setup
Wireless
Select
Enable Wireless LAN
to activate wireless LAN.
Wireless Network Settings
Wireless
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Client
Isolation
Select this to keep the wireless clients in this SSID from communicating with each other
through the AMG1302-T11C.
MBSSID/LAN
Isolation
Select this to keep the wireless clients in this SSID from communicating with clients in
other SSIDs or wired LAN devices through the AMG1302-T11C.
Select both
Client Isolation
and
MBSSID/LAN Isolation
to allow this SSID’s wireless
clients to only connect to the Internet through the AMG1302-T11C.