ZyXEL Communications AMG1302-T11C User Manual Download Page 17

Page: 17 / 307

Chapter 1 Introduction

AMG1302-T11C User’s Guide

1.7.1 Using the Reset Button

Make sure the

POWER

LED is on (not blinking).

To set the device back to the factory default settings, press the

RESET

button for ten seconds or

until the

POWER

LED begins to blink and then release it. When the

POWER

LED begins to blink,

the defaults have been restored and the device restarts.

1.8 Ways to Manage the AMG1302-T11C

Use any of the following methods to manage the AMG1302-T11C.

• Web Configurator. This is recommended for everyday management of the AMG1302-T11C using a

(supported) web browser.

• FTP for firmware upgrades and configuration backup/restore.

Summary of Contents for AMG1302-T11C




















































































































































































































































































































Search results

Summary of Contents for AMG1302-T11C

Reviews:

Related manuals for AMG1302-T11C

Brands by name

Popular brands

ZyXEL Communications AMG1302-T11C, User Manual

Search results

Summary of Contents for AMG1302-T11C

Reviews:

Related manuals for AMG1302-T11C

Brands by name

Popular brands