Chapter 7 Wireless LAN
AMG1302-T11C User’s Guide
101
Figure 36
Network Setting > Wireless > WDS
The following table describes the labels in this screen.
7.7 The WMM Screen
Use this screen to enable WiFi MultiMedia (WMM) and WMM Power Save in wireless networks for
multimedia applications.
Click
Network Setting
>
Wireless > WMM
. The following screen displays.
Figure 37
Network Setting > Wireless > WMM
Table 25
Network Setting > Wireless > WDS
LABEL
DESCRIPTION
WDS Security
Select the type of the key used to encrypt data between APs. All the wireless APs
(including the AMG1302-T11C) must use the same pre-shared key for data transmission.
The option is available only when you set the security mode to
WPA(2)
or
WPA(2)-
PSK
in the
Wireless > General
screen.
TKIP
Select this to use TKIP (Temporal Key Integrity Protocol) encryption.
AES
Select this to use AES (Advanced Encryption Standard) encryption.
#
This is the index number of the individual WDS link.
Active
Select this to activate the link between the AMG1302-T11C and the peer device to which
this entry refers. When you do not select the check box this link is down.
Remote Bridge
MAC Address
Type the MAC address of the peer device in a valid MAC address format (six hexadecimal
character pairs, for example 12:34:56:78:9a:bc).
PSK
Enter a Pre-Shared Key (PSK) from 8 to 63 case-sensitive ASCII characters (including
spaces and symbols).
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.