ZyXEL Communications AMG1302-T10A User Manual Download Page 24

Page: 24 / 332

Chapter 2 The Web Configurator

AMG1302-T10A User’s Guide

The icons provide the following functions.

2.2.2 Navigation Panel

Use the menu items on the navigation panel to open screens to configure Device features. The

following tables describe each menu item.

Table 2

Web Configurator Icons in the Title Bar

ICON

DESCRIPTION

Wizards

: Click this icon to go to the configuration wizards. See

Chapter 5 on page

for more information.

Logout

: Click this icon to log out of the web configurator.

Table 3

Navigation Panel Summary

LINK

TAB

FUNCTION

Status

This screen shows the Device’s general device and network status

information. Use this screen to access the statistics and client list.

Network

WAN

Internet Access

Setup

Use this screen to configure ISP parameters, WAN IP address

assignment, and other advanced properties.

Connections

Use this screen to configure additional WAN connections.

LAN

Use this screen to configure LAN TCP/IP settings, and other advanced

properties.

DHCP Server

Use this screen to configure LAN DHCP settings and DNS server.

Client List

Use this screen to view current DHCP client information and to always

assign specific IP addresses to individual MAC addresses (and host

names).

IP Alias

Use this screen to partition your LAN interface into subnets.

IPv6

Use this screen to configure the IPv6 settings on the Device’s LAN

interface.

Wireless LAN

Use this screen to configure the wireless LAN settings and WLAN

authentication/security settings.

More AP

Use this screen to configure multiple BSSs on the Device.

WPS

Use this screen to configure and view your WPS (Wi-Fi Protected

Setup) settings.

WPS Station

Use this screen to set up a WPS wireless network.

WDS

Use this screen to set up Wireless Distribution System links to other

access points.

Scheduling

Use this screen to configure the dates/times to enable or disable the

wireless LAN.

NAT

General

Use this screen to enable NAT.

Port Forwarding Use this screen to make your local

servers visible to the outside world.

ALG

Use this screen to enable or disable SIP ALG.

Security

Firewall

General

Use this screen to set the default action that the firewall takes on

packets depending on packet direction.

Rules

Use this screen to view the configured firewall rules and add, edit or

remove a firewall rule.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands