ZyXEL Communications AMG1302-T10A User Manual Download Page 70

Page: 70 / 332

Chapter 6 WAN Setup

AMG1302-T10A User’s Guide

WAN IP Address

The WAN IP address is an IP address for the Device, which makes it accessible from an outside

network. It is used by the Device to communicate with other devices in other networks. It can be

static (fixed) or dynamically assigned by the ISP each time the Device tries to access the Internet.

If your ISP assigns you a static WAN IP address, they should also assign you the subnet mask and

DNS server IP address(es) (and a gateway IP address if you use the Ethernet or ENET ENCAP

encapsulation method).

Multicast

Traditionally, IP packets are transmitted in one of either two ways - Unicast (1 sender - 1 recipient)

or Broadcast (1 sender - everybody on the network). Multicast delivers IP packets to a group of

hosts on the network - not everybody and not just one.

IGMP

IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to establish membership

in a Multicast group - it is not used to carry user data. There are three versions of IGMP. IGMP

version 2 and 3 are improvements over version 1, but IGMP version 1 is still in wide use.

Finding Out More

See

Section 6.4 on page 80

for technical background information on WAN.

6.1.3 Before You Begin

You need to know your Internet access settings such as encapsulation and WAN IP address. Get this

information from your ISP.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands