ZyXEL Communications AMG1302-T10A User Manual Download Page 33

Page: 33 / 332

Chapter 4 Tutorials

AMG1302-T10A User’s Guide

4.2.2 Using WPS

This section shows you how to set up a wireless network using WPS. It uses the Device as the AP

and ZyXEL NWD210N as the wireless client which connects to the notebook.

Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter

or PCMCIA card).

There are two WPS methods to set up the wireless client settings:

•

Push Button Configuration (PBC)

- simply press a button. This is the easier of the two

methods.

•

PIN Configuration

- configure a Personal Identification Number (PIN) on the Device. A wireless

client must also use the same PIN in order to download the wireless network settings from the

Device.

Push Button Configuration (PBC)

Make sure that your Device is turned on and your notebook is within the cover range of the wireless

signal.

Make sure that you have installed the wireless client driver and utility in your notebook.

In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button

(

Start

WPS

button).

Push and hold the

WPS

button located on the Device’s rear panel for more than 5 seconds.

Alternatively, you may log into Device’s web configurator and click the

Push Button

in the

Network

Wireless LAN

WPS Station

screen.

Note: Your Device has a WPS button located on its rear panel as well as a WPS button in

its configuration utility. Both buttons have exactly the same function: you can use

one or the other.

Note: It doesn’t matter which button is pressed first. You must press the second button

within two minutes of pressing the first one.

The Device sends the proper configuration settings to the wireless client. This may take up to two

minutes. The wireless client is then able to communicate with the Device securely.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands